liqiang

李强

教授

本人83年毕业于吉林工业大学,86年回学校攻读硕士,91年师从陈秉聪院士攻取博士学位,1999年去英国华威大学做访问学者。现主要从事车身虚拟设计、车身轻量化设计、汽车数字化造型及其虚拟评价、车辆产品CAD系统的二次开发,车身结构正向和逆向设计等方面的工作。自工作以来参加国家七五攻关项目、国家自然基金项目、吉林省科技厅青年基金和基础研究项目、国家863项目,以及横向科研项目等近20项。其中负责项目5项,其余为主要参加人。已发表论文20多篇。其中参与的国家七·五重点攻关项目于1989年获国家计委、国家科委、财政部颁发的荣誉证书,于1990年通过国家鉴定,并于1993年获机电部科技进步一等奖。

成果简介:

近年来科研项目:
[1] 汽车水泵设计系统软件开发,富奥汽车零部件股份有限公司泵业分公司项目,项目负责人,2011.01~12。
[2] 汽车造型2D手绘与3D数模一体化关键技术研究,国家“863”计划项目,项目负责人,2008.10~2010.11。该项目开发了AutoSketch手绘造型系统,获得了国家软件著作权1项。
[3] 基于特征的车身覆盖件参数化曲面重构技术研究,吉林省科技发展计划项目-应用基础,主要参加人,2007.10~2009.12。
[4] 重型汽车集成开发先进技术子项——重型汽车驾驶室开发,国家863项目,主要参加人,2007.01~2009.09。
[5] 将汽车造型设计草图转化成三维曲面模型的新颖算法研究,汽车车身先进设计制造国家重点实验室开放基金项目,项目负责人,2007.01~2008.10。
[6] Novel Methods for Creation of 3-D Geometry from 2-D Sources,英国DTI/EPSRC部分资助、由Coventry University承担的、与SDRC、Rover Group、Ford等合作的项目,项目主要参加人,2001~2005。

近年来发表的EI论文:
[1] Qiang Li, R. M. Newman, “An Approach from 2-D to 3-D for Automotive Styling”, Proceedings of the International Conference on Mechanical Engineering and Mechanics (ICMEM2007), November 5-7, 2007 Wuxi, China, Vol. 2, pp. 1841-1846. (ISTP)
[2] Qiang Li, Xiang Lv, Ge Zhang, Changhai Yang, “The Way of Automotive 3-D Styling Based on Digital Hand Sketching”, Proceeding 2009 IEEE 10th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID&CD 2009), November 26-29, Wenzhou, China, pp. 933-937.(EI)
[3] Qiang Li, Changhai Yang and R. M. Newman, “Automotive Sketch Processing for Reverse Transformation into 3-D”, Proceeding 2009 IEEE 10th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID&CD 2009), November 26-29, Wenzhou, China, pp. 1267-1272.(EI)
[4] Qiang Li, Ling Yang, Dengfeng Wang, “The Combination of Two Consecutive Strokes in Automotive Styling from 2-D to 3-D”, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID&CD 2010), November 17-19, Yiwu, China, pp. 1526-1531. (EI)
[5] Qiang Li, Ling Yang, Dengfeng Wang, Maosen Gao, “The Multi-Stroke Combination in the Automotive Styling from 2-D to 3-D”, 2010 IEEE 11th International Conference on Computer-Aided Industrial Design & Conceptual Design (CAID&CD 2010), November 17-19, Yiwu, China, pp. 1401-1405. (EI)
[6] Qiang Li, R. M. Newman and Changfu Zhao, “3-D Coordinate Determination from 2-D Automotive Sketches:part1”, 2010 International Conference on Advanced Mechanical Engineering (AME2010), September 4~5, Luoyang, China, Applied Mechanics and Materials Vols. 26-29 (2010) pp. 539-542, Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/ AMM.26-28.539.(EI)
[7] Qiang Li, R. M. Newman and Shuaifeng Zhang, “3-D Coordinate Determination from 2-D Automotive Sketches:part2”, 2010 International Conference on Advanced Mechanical Engineering (AME2010), September 4~5, Luoyang, China, Applied Mechanics and Materials Vols. 26-29 (2010) pp. 543-546, Trans Tech Publiccations, Switzerland, doi:10.4028/www.scientific. net/AMM.26-28.543.(EI)
[8] Qiang Li, Xi Wang, Nan Qi, Yanping Tang, and R. M. Newman, “Surface Matching by Using the Simple Strategy in the Application of Automotive Styling”, 2010 International Conference of Information Science and Management Engineering (ISME 2010), August 7~8, Xian, China, pp. 253-256. (EI)
[9] Qiang Li, Yanping Tang, Nan Qi, Xi Wang, and R. M. Newman, “Comparison of the Evolutionary Strategies for the Surface Matching Based on Projective Area”, 2010 International Conference of Information Science and Management Engineering (ISME 2010), August 7~8, Xian, China, pp. 257-260. (EI)
[10] Qiang Li and R. M. Newman, “Feature Extraction from Automotive Sketch”, The journal of designing in China (中国设计学报), 2010, pp. 29-39.

参编的国外专著
“MATLAB – A UBIQUITOUS TOOL FOR THE PRACTICAL ENGINEER”, Edited by Clara M. Ionescu, Published by INTECH, 2011.10, ISBN 978-953-307-907-3.

软件著作权
《汽车三维手绘造型系统》——AutoSketch(登记号:2010SR061169,证书号:软著登字第0249442号)

联系方式:
地址:吉林大学南岭校区汽车学院车身系能动楼501室
电话:13578867200
电子邮箱:q_li@jlu.edu.cn